#
# Date: 2004-04-17
# Reported by: Christian Hammers <ch@lathspell.de>
# Mainboard Manufactor: ASUS 
# Mainboard Model: 8NX8-X
#
# Modules: asb100 i2c_sensor i2c_nforce2
# Kernel: 2.6.5
# lm-sensors: 2.8.6
#
# 0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
# 0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1)
# 0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
# 0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
# 0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
# 0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
# 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
# 0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
# 0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
# 0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
# 0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
# 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
# 0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
# 0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
#
#  asb100-i2c-8-2d
#  Adapter: SMBus nForce2 adapter at 5500
#  VCore 1:   +1.68 V  (min =  +1.55 V, max =  +1.73 V)       
#  +3.3V:     +3.39 V  (min =  +3.12 V, max =  +3.46 V)       
#  +5V:       +5.05 V  (min =  +4.73 V, max =  +5.24 V)       
#  +12V:     +11.67 V  (min = +10.76 V, max = +13.19 V)       
#  -12V (reserved):
#            -12.20 V  (min =  -0.00 V, max =  -0.00 V)       
#  -5V (reserved):
#             -5.12 V  (min =  -0.00 V, max =  -0.00 V)       
#  CPU Fan:  4326 RPM  (min = 1997 RPM, div = 4)              
#  M/B Temp:    +34 C  (high =    +0 C, hyst =    +0 C)   
#  CPU Temp (AMD):
#               +25 C  (high =   +80 C, hyst =   +75 C)   
#  vid:      +1.650 V
#  alarms:
#

chip "asb100-*"
    set vrm 9.0

    label in0 "VCore 1"
    set in0_min vid * 0.95
    set in0_max vid * 1.05

    label in1 "VCore 2"
    ignore in1
    set in1_min vid * 0.95
    set in1_max vid * 1.05

    label in2 "+3.3V"
    set in2_min 3.3 * 0.95
    set in2_max 3.3 * 1.05

    label in3 "+5V"
    compute in3 1.68 * @ ,  @ / 1.68
    set in3_min 5.0 * 0.95
    set in3_max 5.0 * 1.05

    label in4 "+12V"
    compute in4 3.8 * @ , @ / 3.8
    set in4_min 12  * 0.90
    set in4_max 12  * 1.10

    label in5 "-12V (reserved)"
    #ignore in5
    compute in5 -@ * 3.97 ,  -@ / 3.97
    set in5_max -12 * 0.90
    set in5_min -12 * 1.10

    label in6 "-5V (reserved)"
    #ignore in6
    compute in6 -@ * 1.666 , -@ / 1.666
    set in6_max -5  * 0.95
    set in6_min -5  * 1.05

    label temp1 "M/B Temp"
    set temp1_over 45
    set temp1_hyst 40

    label temp2 "CPU Temp (Intel)"
    ignore temp2
    set temp2_over 60
    set temp2_hyst 50

    # PWRTMP connector on P4S333, for external sensor
    label temp3 "Power Temp"
    ignore temp3
    set temp3_over 45
    set temp3_hyst 40


    # Used for Athlon diode, ignore for P4S333
    label temp4 "CPU Temp (AMD)"
    set temp4_over 60
    set temp4_hyst 50
    #ignore temp4

    label fan1 "CPU Fan"
    set fan1_div 4
    set fan1_min 2000

    label fan2 "Chassis Fan"
    set fan2_div 2
    set fan2_min 4000
    ignore fan2

    label fan3 "Power Fan"
    set fan3_div 2
    set fan3_min 4000
    ignore fan3