# Date: 2006-06-12
# Reported by: Christian Hammers <ch@lathspell.de>
# Mainboard Manufactor: MSI 
# Mainboard Model: MS-9206 v10
# Comments: Chassis intrusion alarm is always on :(

chip "w83627hf-*"
        # # I2C adapter drivers
        # i2c-i801
        # i2c-isa
        # # I2C chip drivers
        # w83781d
        # w83627hf

	# Output before setting options:
	#
        # w83627hf-isa-0290
        # Adapter: ISA adapter
        # in0:       +1.42 V  (min =  +1.20 V, max =  +1.60 V)
        # in1:       +2.51 V  (min =  +1.20 V, max =  +3.58 V)
        # in2:       +3.30 V  (min =  +2.82 V, max =  +3.79 V)
        # in3:       +2.94 V  (min =  +2.56 V, max =  +2.72 V)
        # in4:       +2.96 V  (min =  +2.82 V, max =  +0.82 V)
        # in5:       +0.53 V  (min =  +0.26 V, max =  +0.77 V)
        # in6:       +3.55 V  (min =  +3.33 V, max =  +3.84 V)
        # in7:       +3.25 V  (min =  +3.36 V, max =  +1.79 V)
        # in8:       +2.91 V  (min =  +2.54 V, max =  +3.92 V)
        # fan1:     7105 RPM  (min = 2657 RPM, div = 2)
        # fan2:     7500 RPM  (min = 2657 RPM, div = 2)
        # fan3:        0 RPM  (min =    0 RPM, div = 1)
        # temp1:       +37 C  (high =  +120 C, hyst =  +115 C)   sensor = diode
        # temp2:     +37.5 C  (high =  +120 C, hyst =  +115 C)   sensor = diode
        # temp3:     +37.5 C  (high =  +120 C, hyst =  +115 C)   sensor = thermistor
        # vid:      +1.400 V  (VRM Version 8.2)
        # alarms:   Chassis intrusion detection                      ALARM
        # beep_enable:
        #           Sound alarm disabled

        ignore fan3
        ignore alarm0
        ignore alarm1
        ignore alarm2
        ignore alarm3
        ignore chassis

        set in4_min 3 * 0.70
        set in4_max 3 * 1.20
        set in7_max 3 * 0.70
        set in7_min 3 * 1.20

        set temp1_over 52
        set temp1_hyst 47

        set temp2_over 52
        set temp2_hyst 47

        set temp3_over 52
        set temp3_hyst 47