#
# Date: 2005-11-15
# Reported by: Christian Hammers <ch@lathspell.de>
# Mainboard Manufactor: Canterwood/HR (Tyan?)
# Mainboard Model: S5112 Tomcat i875ES
# Modules: lm85 eeprom w83627hf    
#
chip "adm1027-*"

  # Voltages
  ignore vid
  ignore pwm1
  ignore pwm2
  ignore pwm3

  label  in0 "DDR VCC" 
  ignore in1
  label  in2 "3VSB"
  label  in3 "+5V"
  label  in4 "DDR VTT" 

  compute in3 ((5.11/7.5)+1)*@  ,  @/((5.11/7.5)+1)

  set in0_min  2.5 * 0.95
  set in0_max  2.5 * 1.05
  set in2_min  3.3 * 0.95
  set in2_max  3.3 * 1.05
  set in3_min  5.0 * 0.95
  set in3_max  5.0 * 1.05
  set in4_min  1.2 * 0.95
  set in4_max  1.2 * 1.05

  
  # Fans
  label fan1 "CPU Fan"
  label fan2 "Chs.Fan2"
  label fan3 "Chs.Fan3"
  label fan4 "Chs.Fan6"

  set fan1_min 2000
  set fan2_min 2000
  set fan3_min 2000
  set fan4_min 2000


  # Temperatures
  label temp1 "CPU Temp"
  label temp2 "Sys Temp"
  label temp3 "VRM Temp"
    

chip "w83627hf-*"
  # Voltages
  set vrm 9.0

  label  in0 "VCore"
  ignore in1
  ignore in2
  label  in3 "Stdby 5V"
  label  in4 "+3.3V"
  label  in5 "+12V"
  ignore in6
  ignore in7
  ignore in8
  
  compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
  compute in5 ((28/10)+1)*@  ,  @/((28/10)+1)

  # set limits to  5% for the critical voltages
  # set limits to 10% for the non-critical voltages
  # set limits to 20% for the battery voltage
  set in0_min 1.5 * 0.95
  set in0_max 1.5 * 1.05
  set in3_min 5.0 * 0.95
  set in3_max 5.0 * 1.05
  set in4_min 3.3 * 0.90
  set in4_max 3.3 * 1.10
  set in5_min 12 * 0.90
  set in5_max 12 * 1.10


  # Fans
  ignore fan1
  ignore fan2
  label  fan3 "Chs.Fan7"

  # if slow fans report 0, change these values to 4
  set fan1_div 2
  set fan2_div 2
  set fan3_div 2
  set fan3_min 2000


  # Temperatures
  ignore temp1
  ignore temp2
  ignore temp3